Material Takeoff (MTO) Services

Translate abstract construction work items into physical procurement bills. Know exactly how many cement bags, steel rebar tonnes, truckloads of sand, and boxes of tiles your project requires.

Generate Material Bill WhatsApp Inquiries

Procurement-Driven Material Breakdowns

Ordering materials on rule-of-thumb leads to costly on-site wastage, double-handling, or critical project stoppages. TEC generates exact Bill of Materials (BOM) linked with standard dry-volume conversion factors and reasonable wastage factors.

CEMENT PROCUREMENT

Cement Grade & Demand Breakdown (Bags)

Exact cement consumption derived using standard dry-volume conversion factor 1.54, segregated into OPC 53 and PPC.

Precision Standard: Exact Bag Indent

Deliverable Format: Procurement Schedule

Compliance Code: IS 456 & CPWD Constants

Dry volume multiplier 1.54 applied for wet concrete
OPC 53 allocated for structural RCC frame
PPC allocated for blockwork mortar and plastering

Cement Bags = [Dry Vol × (Cement Part / Ratio Sum) × 1440 kg/cum] / 50 kg

Inspect Sample Model →

REBAR INDENT

Steel Rebar Procurement Schedule (MT)

Diameter-wise tonnage indents specifying 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, and 32mm with rolling margin calibrations.

Precision Standard: Diameter-Wise Precision

Deliverable Format: Purchase Order Ready

Compliance Code: IS 1786 (Fe500D / Fe550D)

Primary mill rebar indents (Tata, JSW, SAIL)
Commercial rolling margin factor (+2.5%) applied
Procurement delivery lot phase planning

Rebar Indent MT = Theoretical BBS Weight × 1.03 (Lapping & Scrap Allowance)

Inspect Sample Model →

AGGREGATE & BLOCKS

Aggregates, Sand & Block Counts (CFT / Nos)

M-Sand Zone II for concrete, P-Sand for plastering, 20mm/10mm granite aggregate, and AAC/solid block units with breakage allowances.

Precision Standard: Quarry Order Ready

Deliverable Format: Material Master Indent

Compliance Code: IS 383 & IS 2185

M-Sand & P-Sand demand separated by grading
Coarse aggregate 20mm:10mm blended at 60:40 ratio
Block units calculated with 2% transit breakage allowance

Block Units = [Net Wall Volume / Block Gross Dimensions] × 1.02

Inspect Sample Model →

DIRECT CLIENT VAULT

Inspect Real Civil Estimation Deliverable Models

Want to see real unpriced BOQs, unit rate analysis spreadsheets, or tender normalization matrices? Open our unlocked models vault directly on your mobile or desktop.

Open Models Vault (or Scan QR) →